Send a drawing, a spec or a piece of the original. We model it, prototype it, cut the die in our own tool room and extrude it in Linden, New Jersey.
Your detail calls for a profile no catalog carries. Send the section drawing or spec and we tool it as drawn, in cellular PVC that won't rot or split.
The old trim is rotted and the profile hasn't been made in decades. Send a cut piece or clear photos and we match it, so the repair disappears into the house and stays put.
Upload a drawing or photos, or mail us a cut section of the original.
Our engineers model the profile and run polymer flow simulation on the design.
A 3D-printed prototype lets you check fit and shape before tooling.
The production die is cut in our tool room and the profile is extruded in Linden.
No outside die shop and no handoffs. The same team that designs the die builds the calibration tooling and runs the line.
A section drawing with overall width, height and key radii. DWG, DXF, STEP or PDF all work.
Shoot the cut end straight on with a ruler or tape in frame, plus one photo of the trim in place.
Mail a short piece of the original to Patwin Plastics, 2300 E Linden Avenue, Linden, NJ 07036. Include your name and project.
Also helpful: interior or exterior use, approximate linear footage, paint or finish, and when you need it.
Check the 34 stock profiles first, including our historic sills. Your match may already exist.
Yes. Send a cut section or clear photos with a ruler in frame. We model the profile, 3D-print a prototype for you to check against the original, then cut the production die in our own tool room.
Yes. Upload the section drawing or spec sheet and we work from it directly. You review a 3D-printed prototype for fit and feasibility before tooling is committed.
No. A drawing helps, but a physical sample or good photos with a ruler in frame are enough to start.
Yes. Cellular PVC mouldings cut, route and paint like premium millwork, and they won't rot, split or absorb moisture.
They depend on the profile's size and complexity and the quantity you need. Send your drawing or sample and we'll come back with a quote for your project.
Every custom profile is designed, tooled and extruded by Patwin Plastics in Linden, New Jersey.
Upload your drawings or photos and tell us about the job. A specialist will follow up within one business day.
Rather talk it through?