Profile Designer Draw It to Scale.

Sketch your moulding's cross-section, add rounds and coves, and send it straight to American Pro.

Back to Custom & Historic Profiles

Draw Your Profile

  1. Click the grid to place points. Click the first point to close the shape.
  2. Or type exact lengths and angles in the panel.
  3. Select a segment to turn it into a round or a cove, or use 3-Point Arc.

Drawing

  • Click to add points. Hold Shift to lock to 15° angles.
  • Click the first point, or press C, to close the shape.
  • Enter or double-click stops drawing.

Exact Dimensions

  • Type lengths like 1-5/8, 0.625 or 41.3 mm.
  • Angles: 0° right, 90° up, 180° left, -90° down.
  • Select a point to type its exact X and Y.

Rounds & Coves

  • Select a segment, then choose Round Out or Cove In.
  • 3-Point Arc: click the end, then any point on the curve. Press 3 to switch it on.
  • Type a new radius or use − and +. Keep End Points or Keep Center. Flip Curve reverses it.
  • Arc radii show in red on the drawing.

Moving Around

  • Scroll or pinch to zoom. Hold Space and drag to pan.
  • F fits the drawing, Ctrl Z undoes.
  • A sketch is fine. Our engineers confirm the final die geometry with you.